CATEGORIES:      Power Management      Cables      Cable Management      Patch Panels      Migration/Mediation      MRV Terminal Servers      Cisco Routers/Switch   

 

Viewing 10 products
Page 1 of 2



 CIS-HWIC-AS-8X2 - Cisco HWIC 8 A/S Patch Panel

Designed and built for the new Cisco HWIC 8 A/S card. (Ea. patch panel supports 2 cards)

  • (16) DB25 connectors on the front and (4) VHDCI connectors on the rear.

  • (2) VHDCI connectors on each HWIC 8 A/S board. 

  • Available in either DTE (male DB25 connectors) or DCE ( female DB25 connectors). 

  • (1) RU in height, 19" wide.
     


PPCIS16-DB25-19 - 16 Port Cisco NM16-A/NM32-A Async Distribution Panel

  • Used w/ Cisco NM16-A or NM32-A (Async Only)

  • (2) HD68 to (16) DB25 (F)

  • (1) Rack Unit/ 19 Inch Mounting


Views: [Rear View]


 


Views: [Rear View]


 PPCIS16 - Cisco "Pancho" 16 Port Patch Panel For NM32-A

Standardization of Wiring

  • CBM Pancho-16 allows for the standardization of wiring adapters. DTE / DCE operation is switch selectable from CBM Pancho-16's front panel on an individual port basis.
Elimination of Octal Cables
  • CBM Pancho-16 eliminates "Spider" cables.Two 68 pin high density cables interface to 16 RJ45 ports thus eliminating the need for octal cables.
Reduction of Rack Mounting Space
  • CBM Pancho-16 is incredibly compact. Minimal cabinet space is required by CBM Pancho-16's one rack unit height (1.75" height x 1" depth x 19" cabinet width) thus conserving precious equipment rack space. Adapters are available to fit 23" and 25" cabinets.
 


PPCIS16SAM - Custom "Pancho" (Cisco To SAM) 16 Port Distribution Panel For NM32-A

 

  • (16) RJ45 to (2) HD68 Female
  • Mediates AT&T Pin-Outs to Cisco Pin-Outs

Standardization of Wiring

  • CBM Pancho-(SAM) 16 allows for the standardization of wiring adapters. DTE / DCE operation is switch selectable from CBM Pancho-(SAM) 16's front panel on an individual port basis.

Elimination of Octal Cables

  • CBM Pancho- (SAM) 16 eliminates "Spider" cables.Two 68 pin high density cables interface to 16 RJ45 ports thus eliminating the need for octal cables.

Reduction of Rack Mounting Space

  • CBM Pancho- (SAM) 16 is incredibly compact. Minimal cabinet space is required by CBM Pancho- (SAM) 16's one rack unit height (1.75" height x 1" depth x 19" cabinet width) thus conserving precious equipment rack space. Adapters are available to fit 23" and 25" cabinets.



 


Views: [Rear View]


 PPCIS-32-DB25 - Cisco 32 Port NM16-A/NM32-A Async Distribution Panel

  • Used w/ NM16-A or NM32-A (Async Only)

  • (4) HD68 to (32) DB25 (F)

  • (2) Rack Units/ 23 Inch Mounting

 

Page 1 of 2